Some examples of specialist posts include machines with multiple heads, say a plasma cutter with a pucnch marking head.SheetCam has many useful features for plasma, laser, waterjet and oxy-fuel cutting.įor machines that have full control over the Z axis you can program the pierce height and cut height directly. This service is normally free unless the post is particularly complicated. The programming language used is versatile enough to cope with pretty much anything you could possibly want a machine to do.Ĭustom posts can be written to your specifications. If you so wish you can create your own posts. Unlike many CAM packages the post format is freely available and documented. These can be fine-tuned to produce code for virtually any machine.

To get over this, SheetCam comes with a wide variety of post processors. While G-code is theoretically a standard, most machines have their own dialects. Simply use your machine to find the coordinates of two pads, enter these into SheetCam and the drawing will be shifted and rotated to line up exactly. You don't have to worry about mounting your board accurately. The tool settings can be imported dirtectly from the Excellon file if desired.

SheetCam comes with an Excellon import facility to read industry standard Excellon drill files. Parts can be placed in an array to quickly fill a sheet with minimum effort. They can be flipped and rotated to make most efficient use of the material. To prevent corner rounding, the corners can be looped. The holes would also be cut first. As the small holes are too small to fit a full sized lead in and lead out, the leads are reduced in size to fit. SheetCam automatically works out the holes are inside so it reverses the cut direction for these features. SheetCam gives you many options to optimise cutting. Once you have defined you tool you can set up the cut. This increases consumable life and reduces faulty cuts due to blocked or obstructed nozzles Instead of plunging straight in, the cutter torch can ramp in, reducing the amount of material blown back into the torch. Automatic cut ordering to ensure that inside contours are always cut before outside contours.Draw your part the size you want and let SheetCam work out where to run the torch. You can define as many tools as you like for different materials etc. The tool definition allows you define all of the important parameters for cutting.

SheetCam combined witn Mach3 and a torch height controller from CandCNC for an unbeatable plasma cutting solution.

This is useful for machines running Mach3for instance. SheetCam has many useful features for plasma, laser, waterjet and oxy-fuel cutting.įor machines that have full control over the Z axis you can program the pierce height and cut height directly. : Plasma, laser, waterjet and oxy fuel cutting.

Sheetcam tng fully licensed